| Self
Drilling Screws |
Various size screws
are used at all wall corner intersections and along length of wall
Note:
- Size and spacing per
structural engineer's specifications.
- Quantity allows for double
fastening at corners.
- Self-tapping and do not
require pre-drilling of logs.
- Easy to work with.
- Standard joinery system for
the wall and gable logs is of all thread anchors fastening the first
log course to the foundation and self drilling screws thereafter.
|
|
| Anchor
Bolt Extensions |
5/8" diameter
all-thread with coupler nuts for attaching to anchor bolts. |
| Lag
Bolts |
Appropriate sizes
required for roof and floor structurals and posts. |
| Post
Adjusters |
Used at base or top of
post to allow for settlement. |
| "T"
Gussets |
Used at top of porch
posts to attach posts to porch beam to prevent uplift on porch roof. |
| Weather
Seal-Foam Sealant Tape |
Depending on the
situation, use one or two rows in cope between each log and over the saddle
notch at corners to prevent air infiltration. |
| Foam
Insulation |
Used to fill dados at
log joints to prevent air infiltration. |
| Sill
Seal |
Placed
between plate logs and floor deck. |
| Assembly
Instructions |
Assembly
instructions and/or a construction manual, and construction drawings
defining technical aspects of each project as needed for that project are
included in every pre-cut package. All logs are tagged to correspond
to construction drawings that are structurally engineered for the building
location. |
